- Ready to use 2-component epoxy-based anchor adhesive
- Suitable for dry and wet non-cracked concrete
- Applicable with threaded rods and reb ars
- Rapid strength development for early initial loading
- High compressive and tensile strength
- Thixotropic and stable for vertical and overhead application
- Very low application temperature
- Installation kit „MC-AnchorSolid“ with all required system components
- Comfortable processing with MC-Fastpack Power-Tool
- REACh-assessed exposure scenarios: periodical water-contact, periodical inhalation, application
- Anchoring work for static and quasi-steady loads in horizontal, vertical and overhead areas
- Approved system for use in uncracked concrete from C20/25 to C50/60
- Anchoring for dry and permanent wet interior and exterior components, with and without especially
aggressive conditions
- Anchoring of threaded rods and rebars for fixings of attachements e.g. consoles, railings, storage
racks, awnings, scaffolding, suspended ceiling, building technology, etc.
- Approved as bonded anchor according to European Technical Assessment (ETA-15/0506)