SikaSwell A
Hydrophilic swellable joint sealing profiles
SikaSwell A Price in Bangladesh is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures.
- Highly economical joint sealing solution
- Unique properties fill small cracks and voids
- Versatile solution for joints and details
- Permanently water resistant (wet & dry cycles)
- Resistant to various chemical substances
- Easy and fast to apply
Usage
Joint sealing:
- Construction joints
- Pipe and steel work penetrations through walls and floor slabs
- Around all types of penetrations and connection joints
- Construction joints in cable ducts
Packaging
SikaSwell A price in Bangladesh
Single rolls packed in vacuum foil. Multiple single rolls packed in cardboard boxes.
Refer to current price list for packaging variations.
Advantages
- Highly economical joint sealing solution
- Unique properties fill small cracks and voids
- Versatile solution for joints and details
- Permanently water resistant (wet & dry cycles)
- Resistant to various chemical substances
- Easy and fast to apply
- Can be applied on different substrates
- BBA system approvals with SikaSwell S-2
- Available in different sizes
Product Information
Composition
Acrylic polymer
Shelf life
36 months from the date of production
Storage conditions
The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +35 °C. Always refer to packaging.
Density
1.50 kg/l (at +23 °C) | (EN ISO 2811-1) |
Dimensions
Type | Width | Height | Length |
SikaSwell® A 2005 | 20 mm | 5 mm | 20 m |
SikaSwell® A 2010 | 20 mm | 10 mm | 10 m |
SikaSwell® A 2015 | 20 mm | 15 mm | 7 m |
SikaSwell® A 2025 | 20 mm | 25 mm | 5 m |
Application Information
Substrate moisture content
Dry or matt damp. Do not apply in construction joints with existing standing water.
Ambient air temperature
Maximum | +35 °C |
Minimum | +5 °C |
Substrate temperature
Maximum | +35 °C |
Minimum | +5 °C |
Application steps
SUBSTRATE QUALITY
The substrate must be sound, clean, dry or matt damp, free from all surface contaminants that could impair the adhesion.
SUBSTRATE PREPARATION
EXISTING CONCRETE
Rough surfaces are susceptible to leaking. If the surface roughness cannot be leveled with SikaSwell® S-2 the roughness need to be removed by an appropriate Sika leveling mortar or mechanical treatment before the SikaSwell® S-2 and SikaSwell A Price in Bangladesh profile is applied.
FRESHLY CAST CONCRETE
Freshly cast concrete can be smoothed with a batten where SikaSwell® S-2 is to be placed.
APPLICATION
IMPORTANT
Concrete cover
Insufficient concrete cover, low density concrete or voids will prevent the SikaSwell A Price in Bangladesh profile from developing its waterproofing function.
- Place the SikaSwell® profile in the centre of the concrete structure.
- In reinforced concrete maintain a minimum cover of 8 cm on both sides.
- In unreinforced concrete maintain a minimum cover of 15 cm on both sides.
SEALANT WITH A SIKASWELL® PROFILE
- Apply SikaSwell® S-2 adhesive in a narrow bed (size of triangular section ~12 mm tall and ~12 mm wide ) onto the prepared substrate. Extrude enough material to level the roughness of the substrate.
- Press the SikaSwell® profile firmly into the fresh applied SikaSwell® S-2. Place the SikaSwell® profile within a maximum of 30 minutes (+23 °C / 50 % r.h.).
- Ensure full and continuous contact between the SikaSwell® S-2 and both the SikaSwell® profile and the substrate is achieved.
- Allow SikaSwell® S-2 to harden minimum 12 hours before placing concrete. For pouring height > 50 cm, SikaSwell® S-2 must harden for at least 24 hours before placing concrete.
- Protect the SikaSwell® S-2 and the SikaSwell® profile against water (for example, rain) until the concrete is placed.
- During placement compact the fresh concrete well around the SikaSwell A Price in Bangladesh profile to achieve dense concrete without any honeycombing or voids.
CLEANING OF EQUIPMENT
Clean all tools and application equipment immediately after use with Sika® Colma Cleaner. Hardened material can only be removed mechanically.
