Merchantline BD

Sika Plastiment VZ-1 price in Bangladesh

Set retarding Concrete Admixture

Sika Plastiment VZ-1 is a highly efficient set retarding Concrete Admixture.

Sika Plastiment VZ-1 price in Bangladesh provides the following beneficial properties:

  • Increased setting time in hot weather
  • Accelerated hardening after setting
  • Increased ultimate strengths
Sika Plastiment VZ-1 price in Bangladesh

Usage

Sika Plastiment VZ-1 price in Bangladesh is used as retarding admixture in concrete where a controlled extention of setting time is required.

  • Large volume pours
  • Long haul
  • Avoiding of cold joints
  • Construction joints
  • Difficult placing conditions
  • Elevated temperature
  • Revibrated concrete
  • Ready mix concrete

Advantages

Sika Plastiment VZ-1 price in Bangladesh provides the following beneficial properties:

  • Increased setting time in hot weather
  • Accelerated hardening after setting
  • Increased ultimate strengths
  • Long lasting control over slump loss.
  • Better surface finish
  • Chloride free: does not attack reinforcement

Packaging

Sika Plastiment VZ-1 price in Bangladesh

230 kg HDPE carboy

Product Information

Composition

Poly hydroxyl compound

 

Shelf life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging.

Storage conditions

Store in dry conditions at temperatures between +10°C and +40°C. Protect from direct sunlight and frost.

 

Density

~1.11 kg/l at 25°C

 

pH-Value

≥ 6

Application Information

Compatibility
  • Sika Plastiment VZ-1 price in Bangladesh may be combined with many other Sika® Products.
  • Compatible with all types of cements and cementitious materials.
  • Important: Always conduct trials before combining products in specific mixes and combinations.
DISPENSING

Sika Plastiment VZ-1 price in Bangladesh can be dispensed directly into the mixing water or added simultaneously into the concrete mixer.

Consumption

Recommended Dosage

0.20 – 0.6% by weight of cement. The retardation rate achieved is directly dependent on the dosage rate which in turn is influenced by quality of cement and aggregates, w/c ratio and temperatures. It is advisable to carry out trial mixes to finalise the optimum dosage rate.

Higher dosage may be used if agreed by engineer and consultant.
Stir well before use.

DOWNLOADS

Scroll to Top