• Your Trusted 24 Hours Service Provider!

Yearly Archives: 2022

Waterproof Tile Adhesive in Bangladesh

 Tile adhesive is a premixed blend of exceptionally well-chosen ordinary portland cement, well-graded fine sand, and added substances to improve its basic properties for laying tiles and giving it more strength and flexibility. Superior tile Adhesives can be utilized to lay tiles on existing tiles, on finished concrete, on wooden substrates, or other unique substrates. However, each type of tile adhesive is made for a different type of surface application to give the best output to users based on the usage areas and atmosphere. Tile Adhesive can be utilized for fixing a wide range of tiles and stones over different substrates. These Tile Fixing Adhesives are prepared to-blend, self- restoring, and with astounding adhesion properties. Their superior bonding strength prevents shrinkage, breaks, and slippage of tiles.

Zentrival PL is a WATERPROOF TILE ADHESIVE is a ready-mixed adhesive specially formulated for fixing ceramic or mosaic wall tiles in wet areas such as showers, power showers, bathrooms and wet rooms, as well as kitchens and other areas. The excellent non-slip characteristics reduce the need for battens. It is one of best tile adhesive in Bangladesh . Zentrival PL-Flex use for marble tile Stone fixing best Adhesive ability.

Types of Waterproof Tile Adhesive:

There are some types of tile adhesive:
  • Tiling of an internal, plastered, blockwork wall subject to dry conditions with large format tiles
  • External wall tiling onto rendered concrete
  • Tiling onto a timber floor with a plywood overplay in domestic kitchen
  • Tiling onto at A T & G wooden floor in a domestic bathroom

Benefits of Waterproof Tile Adhesive:

  • Fast and Efficient
  • Easy to use only mix with water
  • Better Bonding Strength
  • Can be grouted within 24 hours without waiting for the moisture to evaporate
  • Applicable on existing tiles, many special substrates like polished cement, dry wall system etc.
  • Thinner layer

Waterproof Tile Adhesive Importers Company in Bangladesh:

  • Volza
  • theludigshafen
  • Sonic ltd.
  • New Hope Corporation

Best Joint Sealent and Bridge Adhesive in Bangladesh

Joint sealants are used to seal joints and openings (gaps) between two or more substrates and are a critical component for building design and construction. The main purpose of sealants is to prevent air, water, and other environmental elements from entering or exiting a structure while permitting limited movement of the substrates. Specialty sealants are used in special applications, such as for fire stops, electrical or thermal insulation, and aircraft applications.

Sealants are used for a variety of commercial and residential applications. Common sealants include silicone, acrylic, urethane, butyl, and other polymer types. Various formulations have been developed over the years, which meet performance specifications established by industry standards, as well as for the specific and unique needs of the end user.

Conventional joint systems for expansion joints on industrial floors are based on polyurethanes, silicones, MS polymers or polysulphides. These are usually less resistant than the adjoining coating and vulnerable to chemical attack, quickly becoming brittle and needing to be repaired within relatively short intervals. Mycoflex Resyst can eliminate this vulnerability. MC-Bauchemie’s product system consists of prefabricated mouldings made from a special polymer foam that is highly resistant to chemical attack, mechanical stressing and permanent water exposure. It delivers a thoroughly reliable joint system for floors and expansion joints, even where components suffer significant thermal expansion and heavy mechanical wear and tear. This makes the joint system particularly suited to a wide range of industrial floor applications, especially the chemical and oil industries and in the sewage treatment sector.

Types of Joint Sealent:

Different types of sealants with good properties are available. The basic properties of a good sealant should be as follows.

  • The sealant should have good bond with building materials.
  • The sealant should be soft.
  • It should be flexible.
  • It should not affected by the weather changes.
  • It should strong against stress and stress relief cycle.

Benefits of Joint Sealent:

  • Ability to withstand high & low temperatures far better than orgamic rubber
  • Joint sealent are an excellent insulting material
  • Highly durable and form tight seals
  • Great asthetic finish
  • Water repelling material
  • Good thermal stability
  •  Low chemicals reactivity

List of Joint Sealaent Importers Company in Bangladesh:

  • kaizen Limited
  • Star Adhesive
  • Go4worldbusiness
  • Volza

Best Micro Concrete Company in Bangladesh

Micro concrete is a cement based coating which can be applied thinly (approximately 2-3mm) to a range of different surfaces including tile and wood. It provides the look and feel of concrete at a fraction of the cost and weight of real concrete. Micro concrete – sometimes called microconcrete or MicroConcrete – is a great option for bathrooms, kitchens as it provides a hygienic, and stain free surface. What is more, the material is anti-slip and mould free – making it a fantastic choice for floor surfaces inside and out.

Flow able mortar hence does not require compaction. Develop . Mc Micro Concrete is supplied as a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. Emcekrete Type A is one best Powerful micro concrete for industrial requirement for Bangladeshi market.

Types of Micro Concrete:

There some types of micro concrete. These given are as follows:
  • Sika Rep Micro Concrete
  • Cico Micro Concrete
  • Grey Bronco Micro Concrete
  • Conpolycem Micro Concrete

Benefits of Micro Concrete:

  • Multiple decorative finishes.
  • Seamless surface.
  • It can be applied on floors, walls, ceilings, swimming pools and furniture. Interior and exterior spaces.
  • Wide variety of micro concrete colours and textures.
  • Handcrafted application. Exclusive and personalised result.
  • High adherence.compatible with tiles, marble, stoneware, terrazzo, plasterboard, concrete, cement, plaster, etc.
  • Resistant to traffic, knocks, scratches and chemical products.
  • Waterproof.
  • Anti-slip, depending on finishes.
  • Quick and rubble-free works.
  • Material thickness 2/3 mm, so it does not affect the structural load of the building.
  • Natural materials. 100% environmentally friendly product.
  • Easy maintenance and cleaning; with water and neutral pH soap.
  • Germ and bacteria free spaces.

Micro Concrete Manufacturer Company in Bangladesh:

  • Inshabd
  • Levelonebd
  • Go4worldbusiness



Curing Agents Company in Bangladesh

curing agent is a substance that is used to harden a surface or material. It is typically applied to polymer surfaces to facilitate the bonding of the molecular components of the material. The stronger the molecular bonds are, the harder the material surface is.

High compressive strengths alone are not enough to ensure a concrete of sufficient durability. A much more reliable indicator is its density (as defined in EN 206-1 and DIN 1045-2) because low porosity and permeability invariably means higher resistance to external influences. Early curing of your concrete’s fresh surface is essential to ensuring its long-lasting endurance against the ravages of time. Our ready-to-use Emcoril curing agents can be relied upon to create an effective liquid membrane to extend the hydration time of your concrete. They form an impervious, continuous film to keep the moisture in. This allows the strengthening reaction to continue uninterrupted, ensuring that the young concrete is already well protected against aggressive environmental media in its first few months. Emcoril products are applied in just one pass using standard commercial spray units fitted with suitable flat spray nozzles. Brush and roller application is also possible.

Types of Curing Agents:

There are three types of curing agent:

  • Agents that react with the surface upon which they are applied.
  • Catalytic agents that do not react with the material surface.
  • Initiator agents that only begin the hardening reactions but do not continue to react with the system.

Benefits of Curing Agents:

  • Thermal energy is not essential to heat the adhesive or the area of attachment.
  • Easy to augment them by exposing them to high temperatures.
  • Different curing agents contribute distinct properties to the epoxy resin system. Like, resistance to chemicals, heat, inorganics acids, some solvents, etc. Therefore, enabling us to choose a curing agent fulfilling our requirements.
  • No heating equipment is required, hence utilises less energy.
  • Because working at high temperatures is not required, it gives out fewer vapours. Hence, it is less toxic.
  • They are cost affordable.

Curing Agents Manufacturer Company in Bangladesh:

List oCuring Agents Impoters in Bangladesh:

Bangladesh Tradeford
Falcon Group etc.