Sika MonoTop 122 F
Dual shrinkage compensated, trowelable fibre reinforced thixotropic repair mortar
Sika MonoTop 122 F price in Bangladesh trowel able mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop 122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.
- Easy to use (only to be mixed with water)
- Excellent workability
- Adjustable consistency
Usage
- Repair of spalling and damaged concrete in buildings, bridges, infrastructure and super structure works
- Use in horizontal, vertical and overhead applications without the need of formworks.
- Repairing concrete defects like pores, honeycombs and level irregularities.
- Use as high adhesion render, with high abrasion resistance, waterproof to protect, repair and maintain concrete structures.
Packaging
Advantages
- Easy to use (only to be mixed with water)
- Excellent workability
- Adjustable consistency
- Structural and Cosmetic repairs
- Applicable in layers up to 50 mm thickness (vertical surface)
- Good adhesion strength
- High abrasion, wear and impact resistance
- Ideal where the repairs are more than 5 mm
- Non corrosive, non toxic
- Increase resistance to salt water, chlorides and carbonation
- Sprayable – able to repair complex profiles easily with minimal rebound
Product Information
Composition
Cement, selected aggregates and additives
Shelf life
6 months from date of production if stored as per recommendation.
Storage conditions
Store properly in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C.
Bulk Density
~1.3 kg/l at 27 °C
Application Information
Mixing Ratio
Water : Powder = 0.15- 0.16 by weight (4.5 – 4.8 ltr of water per bag)
Layer Thickness
| Horizontal | Vertical | Overhead |
Min. | 5 mm | 5 mm | 5 mm |
Max. | 50 mm | 40-50 mm | 15 mm |
Ambient Air Temperature
+10°C min. / +40°C max.
Substrate Temperature
+10°C min. / +40°C max.
Pot Life
~ 40 minutes @ +20°C
Consumption
Consumption
~2200 kg/m3 At Water: Powder ratio 0.16
Yield
30 kg of product yields approximately 14 liters of mortar
Application steps
MIXING
Mix powder mechanically in the correct ratio with water with low speed (max. 500 rpm) electric drill to avoid entraining too much air. In case of 2 or more bags at once use forced action mixer. Put around 80 to 90% of required water in the mixing drum, followed by Sika MonoTop 122 F price in Bangladesh and then add the balance water. Don’t use concrete tilting mixer. Do not mix more material which cannot be used within Pot Life. DO NOT ADD EXTRA WATER. Mix for at least 3 minutes.
APPLICATION
Apply Sika MonoTop 122 F manually using traditional techniques
When a bonding primer is used, ensure it is still ‘tacky’ when the repair material is pressed on (‘wet on wet’ technique). When applied manually, press the repair mortar firmly with a trowel, pushing it well on to the substrate.
Smoothening with trowel or finishing by Float or sponge can be done as soon as mortar has started to stiffen.
CURING TREATMENT
Protect the fresh mortar immediately from premature drying using an appropriate curing method e.g. curing compound, moist geotextile membrane, polythene sheet, etc.
CLEANING OF EQUIPMENT
Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically.
